Our Services
Complete electromechanical scope, one contractor.
From cooling and power to plumbing and structural steel — installed, maintained and supported by certified specialists.
Service
AC Installation & Maintenance
Split, ducted and central AC systems installed, serviced and maintained across Abu Dhabi.
ALTUMBIN delivers end-to-end air-conditioning solutions for villas, apartments, offices, retail outlets, warehouses and industrial facilities across Abu Dhabi and the Northern Emirates. Our HVAC technicians are trained on all major brands including Daikin, Carrier, LG, Trane, York, O-General and Gree — covering everything from single-room splits to multi-zone VRF and central chilled-water plants.
In the UAE climate, air conditioning is not a comfort item — it is critical infrastructure. Poorly installed or neglected units drive up power bills, trip breakers, cause water leaks that damage ceilings and, in commercial spaces, lead to compliance issues. Our approach combines correct sizing (BTU load calculations), certified refrigerant handling and clean, code-compliant electrical and drainage work so every system we hand over runs quietly, efficiently and reliably for years.
What we cover
Scope of work
A snapshot of the tasks our team handles under ac installation & maintenance.
- Split AC Installation
- Central AC Installation
- Ducted AC Systems
- AC Repair
- Preventive Maintenance
- Gas Refilling
- Annual Maintenance Contracts
Installation — sized right, installed clean
Every installation begins with a load survey: room dimensions, insulation, glazing, sun exposure and occupancy. We recommend the correct tonnage, brand and model — never oversized, never undersized. Our installations include vibration-isolated brackets, insulated copper piping brazed with nitrogen purging, deep vacuum before charging, condensate drainage with proper gradient, and neat concealed electrical work with a dedicated MCB.
Maintenance & AMC — protect your investment
Our Annual Maintenance Contracts include scheduled cleaning of filters, coils and blowers, drain flushing, gas pressure checks, electrical tightening, thermostat calibration and a full performance report. AMC customers get priority response, discounted spares and no call-out fees during working hours. Preventive maintenance typically reduces energy consumption by 15–25% and prevents 80% of unplanned breakdowns.
Repair & emergency service
Not cooling, water leaking, tripping the breaker, ice on the coil, strange noises, foul smell — we diagnose and fix all common and complex faults: compressor failure, PCB damage, sensor faults, refrigerant leaks, choked drains, fan motor issues and thermostat problems. Same-day response across Abu Dhabi for most call-outs.
Central & ducted systems
For villas, offices and commercial buildings we install and maintain ducted split, package units, VRF/VRV and chilled-water FCUs. This includes GI duct fabrication, insulation, grille and diffuser balancing, BMS-friendly controls and full commissioning with airflow and temperature readings documented.
How we work
Our process
- 1
Site Survey
Free on-site assessment, load calculation and honest recommendation.
- 2
Written Quotation
Transparent, itemised quote — no hidden extras, no surprise charges.
- 3
Certified Installation
Trained technicians, proper tools, brand-approved procedures.
- 4
Testing & Handover
Performance test, customer walkthrough and warranty documentation.
- 5
Aftercare
Optional AMC with scheduled visits and priority support.
Why ALTUMBIN
What sets us apart
- Certified HVAC technicians with 10+ years UAE experience
- Genuine spare parts and manufacturer-approved refrigerants only
- Workmanship warranty on every installation
- Same-day response for emergency call-outs across Abu Dhabi
- Transparent pricing — quote before work starts
FAQs
Frequently asked
How often should an AC be serviced in the UAE?
Given the dust and heat load, we recommend a full service every 3 months for heavy-use commercial units and every 6 months for residential splits. Filter cleaning should be done monthly.
Do you supply the AC unit or should I buy it?
Both options are available. We can supply and install from any major brand at competitive rates, or install a unit you have already purchased — with the same warranty on our workmanship.
How quickly can you respond to a breakdown?
Within Abu Dhabi city, most emergency call-outs are attended the same day. AMC customers get top priority.
Service
Three-Phase Electrical Services
Licensed three-phase wiring, DB installation and industrial power distribution.
ALTUMBIN provides licensed low-voltage and three-phase electrical services for residential, commercial and industrial clients across the UAE. From a single socket to a full industrial distribution board, our work complies with ADDC / AADC / DEWA regulations and IEC wiring standards — safely designed, correctly rated and properly earthed.
Electrical faults are the leading cause of workplace and building fires. Our licensed electricians take no shortcuts: correct cable sizing based on load and length, proper MCB and RCBO selection, dedicated circuits for high-load equipment, verified earthing and neutral integrity, and clearly labelled DBs so future maintenance is safe and simple.
What we cover
Scope of work
A snapshot of the tasks our team handles under three-phase electrical services.
- Three-Phase Wiring
- Electrical Installation
- Electrical Maintenance
- Power Distribution
- DB Installation
- Cable Laying
- Industrial Electrical Works
- Fault Diagnosis
- Emergency Electrical Services
Three-phase wiring & distribution
We design and install three-phase power for workshops, warehouses, restaurants, gyms, laundries and factories. This covers cable sizing per BS 7671 / IEC, incoming main isolators, main and sub-distribution boards, phase balancing across loads, and dedicated feeders for motors, ovens, chillers, welding sets and heavy machinery. All terminations are torqued to spec and thermally inspected.
DB installation & upgrades
Modern distribution boards with correctly rated MCBs, RCBOs and surge protection devices — clearly labelled, neatly wired and tested. We upgrade old fuse boards to modern DBs, add dedicated circuits for AC units, EV chargers and kitchens, and provide test certificates.
Fault finding & emergency work
Tripping breakers, burning smell, flickering lights, partial power loss, earth leakage — we trace and repair faults using insulation testers, clamp meters and thermal cameras. 24-hour emergency response for critical failures at commercial and industrial sites.
Industrial & MEP works
Cable trays and trunking, containment, motor control panels, VFD wiring, industrial sockets, workshop power layouts, lighting design with lux calculations, and coordination with civil and mechanical trades on fit-out and construction projects.
Testing & certification
Insulation resistance, earth continuity, loop impedance, RCD trip tests and phase rotation — documented and handed over so your installation is audit-ready and insurance-compliant.
How we work
Our process
- 1
Load Assessment
Site visit, measure existing loads and future requirements.
- 2
Design & Quote
Single-line diagram, cable schedule, itemised quotation.
- 3
Safe Installation
Isolated, tagged and tested — never live where avoidable.
- 4
Testing & Certification
Full electrical test report handed over on completion.
- 5
Ongoing Support
Scheduled maintenance and 24/7 emergency response available.
Why ALTUMBIN
What sets us apart
- Licensed electricians familiar with ADDC / AADC / DEWA rules
- Full compliance with IEC / BS 7671 wiring standards
- Thermal imaging on critical DBs — catches issues before failure
- Clean, labelled, documented installations — audit-ready
- 24/7 emergency response for critical breakdowns
FAQs
Frequently asked
Can you upgrade a single-phase supply to three-phase?
Upgrading the incoming supply itself must be applied for with the utility (ADDC/AADC/DEWA). We handle the internal design, DB upgrade, sub-mains and coordination so your premises are ready the day the new supply is energised.
Do you provide electrical test certificates?
Yes. Every completed installation is fully tested and a formal test report is issued for your records and for insurance / compliance purposes.
Is emergency electrical service available at night?
Yes, we provide 24/7 emergency response for critical failures — power outages, burning smells or safety hazards.
Service
Plumbing Services
Full plumbing scope: water supply, drainage, leak repair and emergency call-outs.
ALTUMBIN handles the full plumbing scope — hot and cold water supply, drainage and waste, sanitary fittings, water tanks, booster and transfer pumps, water heaters and irrigation lines. We work on villas, apartments, offices, restaurants, labour accommodations and industrial facilities across Abu Dhabi.
A hidden leak or a poorly graded drain can quietly damage floors, ceilings and structural elements for months before it is noticed. Our plumbers use pressure testing, acoustic leak detection and inspection cameras to find problems accurately — then fix them properly the first time using approved PPR, uPVC, copper and CPVC materials.
What we cover
Scope of work
A snapshot of the tasks our team handles under plumbing services.
- Water Supply Installation
- Drainage Systems
- Bathroom Plumbing
- Kitchen Plumbing
- Pipe Installation
- Water Leak Repair
- Pump Installation
- Maintenance Services
- Emergency Plumbing
New installation & fit-out
Full first-fix and second-fix plumbing for renovations and new fit-outs: hot and cold water manifolds, PPR fusion-welded piping, waste and vent stacks, floor traps, sanitary ware installation, mixers, water heaters and connection to municipal supply and drainage — coordinated with tiling, ceiling and electrical trades.
Leak detection & repair
Acoustic and pressure-decay leak detection to find hidden leaks in walls, slabs and buried lines with minimal breaking. Concealed pipe repairs, pinhole repairs on copper, PPR patch fusion and full re-routing where a pipe is beyond salvage.
Drainage & blockage clearing
High-pressure jetting, mechanical rodding and CCTV drain inspection for kitchen, bathroom, floor traps and main soil lines. We clear blockages, re-grade poorly laid drains and install proper cleanouts so the same blockage does not recur.
Pumps, tanks & water heaters
Supply and installation of booster pumps, transfer pumps, submersible pumps, pressure vessels, GRP and stainless steel water tanks, and electric / central water heaters. Includes tank cleaning, disinfection and pressure switch calibration.
Preventive maintenance
Scheduled inspection of visible pipework, valves, flush cisterns, mixers, water heaters and pumps — tightening, replacing worn washers and seals, and reporting anything trending toward failure so it can be fixed on plan, not in an emergency.
How we work
Our process
- 1
Diagnosis
Site inspection, camera survey or pressure test as needed.
- 2
Quote & Approval
Clear itemised quote — you approve before we open anything.
- 3
Clean Execution
Dust sheets, minimal breaking, tidy workmanship, waste removed.
- 4
Pressure Testing
Every new line is pressure-tested before it is closed up.
- 5
Handover
Walk-through, warranty on workmanship, maintenance advice.
Why ALTUMBIN
What sets us apart
- Experienced plumbers, fully equipped vans, no repeat visits for missing tools
- Acoustic leak detection — locate hidden leaks without smashing walls
- Approved materials only (PPR, CPVC, uPVC, copper)
- Emergency response 7 days a week for burst pipes and major leaks
- Warranty on workmanship, honest advice on when to repair vs replace
FAQs
Frequently asked
How do you find a leak inside a wall without breaking everything?
We isolate the section, pressure-test to confirm the leak zone, then use acoustic detection and thermal imaging to pinpoint the spot — so only a small area needs opening.
Do you clean water tanks?
Yes. We drain, brush-clean, disinfect and refill water tanks and issue a cleaning report — recommended annually as per municipality guidance.
Can you respond to a burst pipe at night?
Yes — 24/7 emergency response for burst pipes, major leaks and flooding.
Service
Steel Structure Fabrication
Certified welding and steel structures for warehouses, canopies, staircases and industrial sites.
ALTUMBIN designs, fabricates and installs structural and architectural steelwork for warehouses, workshops, labour camps, villas, industrial plants and commercial premises. Our team covers everything from shop-drawings and material procurement to certified welding, surface protection and on-site erection.
Steel structures in the Gulf must survive high heat, humidity, coastal salt and heavy design loads. We work only with certified structural sections and plates, use qualified welding procedures, and finish every piece with proper surface preparation (grit blasting where needed), primer and top-coat systems suited to the environment.
What we cover
Scope of work
A snapshot of the tasks our team handles under steel structure fabrication.
- Structural Steel Fabrication
- Steel Welding
- Industrial Steel Works
- Warehouse Structures
- Staircases
- Handrails
- Canopies
- Steel Platforms
- Custom Metal Fabrication
- Installation & Maintenance
Structural steel — warehouses & workshops
Portal-frame buildings, mezzanine floors, roof trusses, purlins, cladding rails and bracing. Fabrication follows approved shop-drawings, with bolted or welded connections designed for the actual loads — dead, live, wind and equipment loads including cranes and mezzanine storage.
Staircases, platforms & handrails
Industrial staircases, access platforms, walkways, ladders, cage ladders and handrails designed to safety standards. Options include chequered plate, grating tread, non-slip nosings and powder-coated or galvanised finishes.
Canopies, sheds & car parks
Steel canopies for entrances, drive-throughs and shaded car parks — trussed or cantilever designs with metal, polycarbonate or membrane roofing. Wind-loaded and anchored properly for UAE conditions.
Custom fabrication & repairs
Machine bases, skids, frames, gates, grills, security doors, brackets, ducting supports and one-off fabrication to drawing or sample. On-site welding repairs, structural strengthening and modifications to existing steelwork.
Surface protection & finish
Grit blasting or mechanical cleaning, zinc-rich primer, epoxy intermediate and polyurethane top-coat — or hot-dip galvanising for the most exposed structures. Correct surface prep is what makes coatings last, and we do not skip it.
How we work
Our process
- 1
Site Measurement
Accurate site survey — no assumptions, no misfits on site.
- 2
Shop Drawings
Detailed fabrication drawings for your approval before cutting steel.
- 3
Certified Fabrication
Qualified welders, calibrated equipment, quality-checked joints.
- 4
Surface Protection
Blast, prime and paint — or galvanise — to suit the environment.
- 5
Site Erection
Safe lifting, correct alignment, torqued bolted connections, handover.
Why ALTUMBIN
What sets us apart
- In-house fabrication workshop — full control over quality and lead time
- Certified welders and qualified welding procedures (WPS/PQR available)
- Correct sections, correct thickness — no substitutions to shave cost
- Proper surface protection systems suited to UAE climate
- Complete package: design, fabricate, coat, deliver and erect
FAQs
Frequently asked
Can you work from architect drawings, or design from scratch?
Both. We build from approved structural drawings, or we can develop a design with our engineering partners based on your requirements and site conditions.
Do you handle installation on site, or only fabrication?
We provide the full package — fabrication in our workshop, transport, on-site erection, welding, alignment and coating touch-up as needed.
What finishes do you offer?
Zinc-rich primer + epoxy + polyurethane paint systems for most applications, hot-dip galvanising for high-exposure structures, and powder coating for architectural handrails and gates.